How to Install a Video Doorbell (Step‑by‑Step Guide)

Category: Installation Guides

Reading Time: 6 minutes

Installing a video doorbell is one of the easiest ways to improve home security and convenience. Whether you're upgrading from a traditional doorbell or adding a smart device for the first time, this guide walks you through the full installation process — wiring, mounting, setup, and testing.

Tools & Materials Needed

• Phillips screwdriver

• Drill + drill bits (if mounting on masonry)

• Level

• Pencil

• Wire strippers

• Anchors and screws (usually included)

• Video doorbell unit

• Existing doorbell wiring (if hardwired)

Safety Notes

• Turn off power to the doorbell circuit at the breaker before working with wiring.

• Use caution when drilling into stucco, brick, or stone.

• Follow the manufacturer’s voltage requirements to avoid device damage.

Step 1: Remove the Old Doorbell

1. Turn off power at the breaker.

2. Remove the old doorbell button using a screwdriver.

3. Pull the wires out gently so they don’t fall back into the wall.

4. Confirm the wires are intact and long enough to connect.

Step 2: Install the Mounting Bracket

1. Hold the bracket against the wall.

2. Use a level to ensure it’s straight.

3. Mark the screw holes with a pencil.

4. If mounting on stucco, brick, or stone, drill pilot holes and use anchors.

5. Secure the bracket with the included screws.

Pro Tip: Many video doorbells include angled wedges to improve camera view — use them if your entryway is tight or off‑center.

Step 3: Connect the Wires

1. Strip about ½ inch of insulation if needed.

2. Connect the two doorbell wires to the terminals on the back of the video doorbell.

3. Polarity usually doesn’t matter unless specified by the manufacturer.

4. Tighten the screws to secure the wires.

Step 4: Attach the Video Doorbell

1. Align the device with the mounting bracket.

2. Snap or screw it into place depending on the model.

3. Restore power at the breaker.

Step 5: Set Up the App

1. Download the manufacturer’s app on your phone.

2. Create or log into your account.

3. Follow the on‑screen instructions to connect the doorbell to Wi‑Fi.

4. Test live view, motion detection, and notifications.

Step 6: Test the Doorbell

1. Press the button to confirm the chime works.

2. Check video quality and field of view.

3. Adjust motion zones to reduce false alerts.

4. Confirm night vision is functioning properly.

Final Checks

• Doorbell is securely mounted

• Wires are properly connected

• App notifications are working

• Video feed is clear

• Motion zones are calibrated

Need Professional Video Doorbell Installation?

ETIGROUP provides fast, clean, and secure video doorbell installations across Las Vegas and Henderson. We handle:

• Hardwired and wireless video doorbells

• Chime compatibility

• Wi‑Fi optimization

• Clean mounting on stucco, brick, or stone

• Smart home integration

Book your install today.

Related Categories

• Installation Guides

• Security Insights

• Smart Home Tips

• AV Projects